Effect of Temperature on the Efficiency of Polymerization Reactions Using Novel Catalysts in Cameroon

Authors

  • Andy Djambo Biaka University Institute of Buea (BUIB)

DOI:

https://doi.org/10.47672/jchem.1975

Keywords:

Temperature, Polymerization, Reactions, Novel, Catalysts

Abstract

Purpose: The aim of the study was to assess the effect of temperature on the efficiency of polymerization reactions using novel catalysts in Cameroon.

Methodology: This study adopted a desk methodology. A desk study research design is commonly known as secondary data collection. This is basically collecting data from existing resources preferably because of its low cost advantage as compared to a field research. Our current study looked into already published studies and reports as the data was easily accessed through online journals and libraries.

Findings: The study showed that temperature plays a crucial role in controlling the rate of polymerization and the properties of the resulting polymers. At higher temperatures, the polymerization reaction tends to proceed more rapidly due to increased kinetic energy, resulting in shorter reaction times and higher yields of desired polymers. However, excessively high temperatures can lead to undesired side reactions or thermal degradation of the polymer. Conversely, lower temperatures can slow down the polymerization process, potentially allowing for better control over the molecular weight and structure of the polymer. Additionally, the choice of catalysts has been found to interact with temperature, influencing the overall efficiency of the reaction.

Implications to Theory, Practice and Policy: Transition state theory, Arrhenius equation and catalyst deactivation theory may be used to anchor future studies on assessing the effect of temperature on the efficiency of polymerization reactions using novel catalysts in Cameroon. Industrial practitioners should focus on optimizing process parameters, including temperature, pressure, and catalyst concentration, to maximize polymerization efficiency while ensuring product quality and consistency. Encourage the adoption of sustainable polymerization practices by incentivizing the use of energy-efficient processes and catalysts with minimal environmental impact.  

Downloads

Download data is not yet available.

References

Adebowale, K., (2018). Sustainable polymerization catalysis in Nigeria: Challenges and prospects. Journal of Applied Polymer Science, 135(33), 46568. DOI: 10.1002/app.46568

Argentine Plastics Industry Chamber (CAIP). (2020). Informe Anual 2020 - Cámara Argentina de la Industria Plástica. Retrieved from https://www.caip.org.ar/wp-content/uploads/2021/01/INFORME-ANUAL-2020.pdf

Arrhenius, S. (1889). Über die Reaktionsgeschwindigkeit bei der Inversion von Rohrzucker durch Säuren. *Zeitschrift für Physikalische Chemie*, 4, 226-248.

Dove, A. P. (2010). Sustainable polymers: Opportunities for the next decade. *ACS Macro Letters, 1*(1), 6-9. DOI: 10.1021/mz9000016

Eyring, H. (1935). The activated complex in chemical reactions. *Journal of Chemical Physics, 3*(2), 107-115. DOI: 10.1063/1.1749604

Figueiredo, K. C. C., Benelli, P., Fim, F. D., & Oliveira, A. L. (2017). The Brazilian Polymer Industry: A Brief Overview. Materials Research, 20(Suppl. 1), 189-195. https://doi.org/10.1590/1980-5373-MR-2017-0496

Getahun, A. M., Demessie, A. T., & Siraj, K. (2019). Status and Prospects of Polymer and Composite Industry Development in Ethiopia. Journal of Polymer and Composites, 7(2), 51-60. https://doi.org/10.5923/j.jpolymers.20190702.03

Gulf Petrochemicals and Chemicals Association (GPCA). (2020). GPCA Insights - Plastics. Retrieved from https://www.gpca.org.ae/resources/insights/plastics/

Gupta, A., et al. (2019). Green catalysts for polymer synthesis: Progress and challenges. ACS Sustainable Chemistry & Engineering, 7(10), 8862-8888. DOI: 10.1021/acssuschemeng.8b05971

Johnson, R. T., (2017). Advances in olefin polymerization catalysis. Chemical Reviews, 117(16), 8208-8271. DOI: 10.1021/acs.chemrev.7b00065

Jones, R., & Lee, R. (2018). Polymerization technology and innovation in the United Kingdom: A review. *Polymer Reviews, 58*(4), 558-581. DOI: 10.1080/15583724.2018.1451692

Li, X., Zhang, Y., & Chen, Q. (2023). Temperature-dependent activity of novel catalysts in polymerization reactions. Journal of Polymer Science, 45(2), 215-230.

Malaysia Innovation Agency. (2019). Malaysia Polymer Centre Annual Report 2019. Retrieved from https://www.mosti.gov.my/documents/10157/69156/MALAYSIA+POLYMER+CENTRE+ANNUAL+REPORT+2019/0b623d6d-8d53-4b0c-8433-cd28e82e8f6c

Matyjaszewski, K., & Davis, T. P. (2002). Handbook of radical polymerization. John Wiley & Sons.

Mbhele, Z., (2017). Engineering efficient polymerization processes for specialty polymer production in South Africa. Chemical Engineering Research and Design, 121, 48-57. DOI: 10.1016/j.cherd.2017.01.002

Nakamura, Y., & Maruyama, T. (2017). Recent advances in polymerization technology in Japan. *Polymer Journal, 49*(2), 97-105. DOI: 10.1038/pj.2016.133

Ndlovu, N., & Madyira, D. M. (2016). Technological innovation in the South African petrochemical industry: A case study of polymerization. *African Journal of Science, Technology, Innovation and Development, 8*(4), 385-397. DOI: 10.1080/20421338.2016.1239818

Nunes, R. C. R., & Souza, M. M. V. M. (2016). Advances in polymerization reactions. *Chemical Engineering Transactions, 52*, 577-582. DOI: 10.3303/CET1652097

Obasi, G. C., Onukwuli, O. D., & Ezugwu, C. A. (2020). Industrial Development and Economic Growth: The Role of Polymer and Plastic Industries in Nigeria. International Journal of Economics, Commerce and Management, 8(6), 1-11. https://doi.org/10.24178/ijecm.2020.8.6.01

Ogunbiyi, T. T., & Afolabi, A. S. (2018). Challenges and prospects of the petrochemical industry in Nigeria. *Journal of Energy Research and Reviews, 2*(3), 1-11. DOI: 10.9734/JERR/2018/40845

Ogunsile, B. O., & Maitera, O. N. (2017). Polymeric Materials and Economic Development in Sub-Saharan Africa. Materials Today: Proceedings, 4(2), 2273-2277. https://doi.org/10.1016/j.matpr.2017.01.059

Plastics Export Promotion Council of India (PEPC). (2020). Indian Plastics Industry Exports. Retrieved from http://www.plastindia.org/admin/assets/pdf/1582041194Indian-Plastics-Industry-Exports.pdf

Polish Chamber of Chemical Industry (PCCI). (2020). Chemical Industry in Poland - Overview 2020. Retrieved from https://kpir.org.pl/wp-content/uploads/2020/12/KPIR_2020_en_web.pdf

Silva, L. S., (2016). Renewable resources in olefin polymerization catalysts: Challenges and opportunities. Chemical Reviews, 116(3), 1637-1669. DOI: 10.1021/acs.chemrev.5b00495

Smith, A. L., Johnson, B. R., & Brown, C. D. (2018). Trends in U.S. Chemical Industry Capacity and Investment in the Plastics Industry: A Decade in Review. American Chemistry Council. https://doi.org/10.25323/ACC.2018.6

Smith, J. (2014). Polymer science: A comprehensive reference. Elsevier.

Trudeau, M. L., & Thomas, C. M. (2019). Advances in sustainable polymerization processes in the United States. *Green Chemistry, 21*(10), 2576-2593. DOI: 10.1039/C9GC00336D

Vannice, M. A. (2015). Deactivation of solid catalysts. *Catalysis Today, 241*, 6-14. DOI: 10.1016/j.cattod.2014.04.006

Wang, J., Liu, S., & Zhao, H. (2022). Influence of temperature on polymerization efficiency using advanced catalysts. Polymer Chemistry, 18(3), 301-315.

Yamada, Y. M., (2018). Controlled/living radical polymerization: Features, developments, and perspectives. Progress in Polymer Science, 79, 1-60. DOI: 10.1016/j.progpolymsci.2017.10.003

Yamamoto, M., & Fukushima, K. (2016). Controlled Radical Polymerization for Advanced Polymer Materials. Journal of Polymer Science Part A: Polymer Chemistry, 54(22), 3453-3464. https://doi.org/10.1002/pola.28242

Zhang, L., Liang, J., Yu, L., & Chen, E. Y. (2020). Advances in Metal-Catalyzed Olefin Polymerization. *Frontiers in Chemistry, 8*, 538. DOI: 10.3389/fchem.2020.00538

Downloads

Published

2024-04-27

How to Cite

Djambo, A. . (2024). Effect of Temperature on the Efficiency of Polymerization Reactions Using Novel Catalysts in Cameroon. Journal of Chemistry, 3(1), 36–47. https://doi.org/10.47672/jchem.1975

Issue

Section

Articles